Skip to main content
Texas Instruments LM2576HVS-5.0/NOPB — Power Management (PMIC / Gate Driver)

LM2576HVS-5.0/NOPB SIMPLE SWITCHER® Buck Regulator, 3 A

MPNLM2576HVS-5.0/NOPB
Active

Texas Instruments SIMPLE SWITCHER® series, LM2576HVS-5.0/NOPB, step-down (buck) regulator, fixed 5 V output, 3 A output, 52 kHz switching frequency, 4 V to 60 V input, surface-mount DDPAK/TO-263-5, -40°C to 125°C operating temperature.

$9.2400Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LM2576HVS-5.0/NOPB specifications
ParameterValue
SeriesSIMPLE SWITCHER®
Output typeFixed
MountingSurface Mount
Voltage - input60V
Voltage - output (Min (Fixed))5V
Output current3A
Frequency52kHz
I/O channels1
Operating temperature-40°C~125°C(TJ)
PackageTube
FunctionStep-Down
TopologyBuck
CaseTO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Output configurationPositive
Synchronous rectifierNo

Product details

The LM2576HVS-5.0/NOPB is a fixed 5 V output step-down (buck) regulator from the SIMPLE SWITCHER® family, delivering 3 A continuous from a 4 V to 60 V input rail. The 52 kHz switching frequency is low by modern standards — it keeps the switching losses down but pushes the inductor value up, typically 100 µH for a 3 A design.

Input headroom and temperature grade

The 60 V maximum input gives real headroom for unregulated supplies in 24 V and 48 V industrial systems — a 48 V nominal rail with 20 % tolerance sits at 57.6 V, still inside the absolute-maximum rating. No synchronous rectifier on this part, so the external Schottky diode (e.g. 1N5822) handles the catch current — its forward drop adds to the overall efficiency, roughly 75-80 % at full load.

Frequently asked questions

What is the difference between LM2576HVS-5.0 and LM2576HVS-ADJ?

The LM2576HVS-5.0/NOPB has a fixed 5 V output, while the LM2576HVS-ADJ uses an external resistor divider to set the output voltage. Both share the same 3 A output, 60 V input max, 52 kHz switching frequency, and DDPAK/TO-263-5 package — the only difference is the feedback path.

Can LM2576HVS-5.0/NOPB replace LM2576T-5.0 in a through-hole design?

The LM2576HVS-5.0/NOPB is a surface-mount DDPAK/TO-263-5 package, while the LM2576T-5.0 is a through-hole TO-220. The electrical specs are the same — fixed 5 V, 3 A, 52 kHz — but the package is different. A direct replacement requires a board layout change to accommodate the surface-mount footprint and thermal pad.