Six-channel CAN isolator with 5 kV isolation for automotive and industrial buses
The Texas Instruments ISO7762QDWRQ1 is a six-channel, unidirectional digital isolator built on capacitive-coupling technology, specifically characterized for CAN bus isolation. It delivers 5000Vrms of galvanic isolation across a 2.25V to 5.5V supply range on both sides, with a data rate up to 100Mbps — enough margin for CAN FD and other high-speed serial links. The 4/2 input-to-output channel count (four on side 1, two on side 2) matches the typical CAN transceiver plus microcontroller interface layout.
AEC-Q100 grade and 125°C operating range — built for under-hood and industrial environments
The 85kV/µs minimum common-mode transient immunity keeps the data link intact in motor-drive and switching-power-supply environments where ground dV/dt spikes would corrupt a slower isolator. Propagation delay is a symmetrical 16ns max (tpLH and tpHL), and pulse-width distortion stays under 4.9ns — tight enough to preserve CAN bit timing without re-synchronization overhead.