Skip to main content
Texas Instruments INA293A5QDBVRQ1 — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

TI INA293A5QDBVRQ1 Current Sense Amplifier, AEC-Q100

MPNINA293A5QDBVRQ1
End of Life

Texas Instruments INA293A5QDBVRQ1, Automotive AEC-Q100, 1-circuit current sense amplifier, 2.7 V to 20 V supply, 900 kHz bandwidth, 2.5 V/µs slew rate, 2 µV offset, SOT-23-5 package, -40°C to 125°C operation.

$3.66Ref. price · indicative, final on quote
INA293A5QDBVRQ1 datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

INA293A5QDBVRQ1 Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Mounting typeSurface Mount
Amplifier typeCurrent Sense
Voltage - input offset2 µV
Voltage - supply span2.7 V
Current - supply1.5mA
Current - input bias20 µA
Operating temperature-40°C ~ 125°C (TA)
-3db bandwidth900 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2.5V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

What this current sense amplifier is and where it fits

The Texas Instruments INA293A5QDBVRQ1 is a single-channel, automotive-grade current sense amplifier in a SOT-23-5 package. It is qualified to AEC-Q100, making it suitable for under-hood and chassis-domain applications where PPAP documentation is required. The device measures current across a shunt resistor with a 900 kHz bandwidth and a 2.5 V/µs slew rate, translating fast current transients in switching converters, motor drives, and solenoid loads into a proportional voltage output. Its 2 µV input offset voltage and 20 µA input bias current support accurate sensing at low shunt drops, preserving efficiency in high-side monitoring.

Supply range and rail compatibility

The amplifier operates from 2.7 V to 20 V. The 1.5 mA supply current adds negligible load to the system power budget.

Package and mounting note

Supplied in an SOT-23-5 package for surface-mount assembly. The footprint matches standard JEDEC patterns; no special pad geometry needed. Available in Tape & Reel or Cut Tape for prototyping and production volume.

Frequently asked questions

Does INA293A5QDBVRQ1 meet automotive AEC-Q100 qualification?

Yes, it is listed under the Automotive, AEC-Q100 series and is rated for operation from -40°C to 125°C, suitable for under-hood and chassis applications.

What is the equivalent or replacement for INA293A5QDBVRQ1?

The INA4290A2IRGVR is a quad-channel current sense amplifier with a 1.1 MHz bandwidth and 2 V/µs slew rate, but it is not a direct pin-for-pin replacement due to the different channel count and package. The INA254A1IPWAR is a zero-drift single-channel alternative with 350 kHz bandwidth and 2.4 V/µs slew rate, in a different package. Neither is a drop-in substitute; verify pinout and channel requirements before substituting.

Where can I buy INA293A5QDBVRQ1 and what is the lead time?

This part is sourced to order; availability and pricing are confirmed at quote time. Contact our sales team for current lead time and RFQ.