Skip to main content
Texas Instruments INA125P — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

INA125P Instrumentation Amplifier, 16-DIP, 150 kHz, 0.2 V/µs

MPNINA125P
End of Life

Texas Instruments INA125P, single instrumentation amplifier, 16-DIP (0.300", 7.62mm) through-hole package, 150 kHz -3dB bandwidth, 0.2 V/µs slew rate, 460 µA supply current, ±50 µV input offset, 2.7 V to 36 V supply span, -40°C to 85°C operating range.

$8.05Ref. price · indicative, final on quote
INA125P datasheet
Packaging16-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

INA125P Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeInstrumentation
Voltage - input offset50 µV
Voltage - supply span2.7 V
Current - supply460µA
Current - input bias10 nA
Current - output (Channel)12 mA
Operating temperature-40°C ~ 85°C
-3db bandwidth150 kHz
PackageTube
Slew rate0.2V/µs
Case16-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

Key ratings and what they mean for your BOM

The 150 kHz bandwidth sets the upper frequency limit for signals the amplifier can accurately amplify. Slew rate is 0.2 V/µs.

Package and mounting — through-hole matters

The 16-DIP package (0.300" row spacing, 7.62 mm) is through-hole only. The 16-PDIP supplier package code confirms the standard pin pitch and body width.

Lifecycle and sourcing posture

The INA125P is listed as Active and ROHS3 compliant. Sourcing is through independent distribution; availability and pricing are confirmed at quote time.

Frequently asked questions

What is the INA125P pinout?

The INA125P uses the standard 16-pin DIP pinout for a single instrumentation amplifier. Refer to the TI datasheet for the exact pin assignments — the evidence does not reproduce the pin diagram here.

What is the INA125P listed slew rate?

The slew rate is 0.2 V/µs, which limits the output to a maximum rate of change of 0.2 volts per microsecond.