Texas Instruments
Texas Instruments INA106KP, differential amplifier, 1 circuit, 3 V/µs slew rate, 1 MHz bandwidth, 50 µV offset, 8-DIP (0.300", 7.62 mm), through hole, 0°C to 70°C, tube.
MOQ 1 · Tube · RoHS · EIA-481 · DAP/DDP · T/T
| Parameter / Attribute | Specification / Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | Differential |
| Voltage - input offset | 50 µV |
| Voltage - supply span | 36 V |
| Current - supply | 1.5mA |
| Current - output (Channel) | 20 mA |
| Operating temperature | 0°C ~ 70°C |
| -3db bandwidth | 1 MHz |
| Package | Tube |
| Slew rate | 3V/µs |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of circuits | 1 |
It's built for one job: subtract two input signals cleanly, with a fixed gain of 1 (or externally set), and reject common-mode noise. The 50 µV input offset and 1 MHz bandwidth make it a solid choice for bridge amplifiers, current-shunt monitors, and line-receiver stages in industrial control and test equipment — as long as the environment stays within 0°C to 70°C.
Slew rate is 3 V/µs; bandwidth is 1 MHz.
