Skip to main content
Texas Instruments DS90UR904QSQ/NOPB — Discrete Semiconductors
Texas Instruments

DS90UR904QSQ/NOPB Deserializer, 903 Mbps, AEC-Q100, 48-WQFN

MPNDS90UR904QSQ/NOPB
End of Life

Texas Instruments DS90UR904QSQ/NOPB, Automotive AEC-Q100 deserializer, 903 Mbps data rate, FPD-Link II/LVDS input, 21 LVCMOS outputs, 48-WQFN (7x7 mm), -40 to 105°C.

$6.39Ref. price · indicative, final on quote
DS90UR904QSQ/NOPB datasheet
Packaging48-WFQFN Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DS90UR904QSQ/NOPB Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Input typeFPD-Link II, LVDS
Output typeLVCMOS
Mounting typeSurface Mount
Voltage1.71V ~ 1.89V, 3V ~ 3.6V
Number of inputs1
Number of outputs21
Operating temperature-40°C ~ 105°C (TA)
PackageBulk
FunctionDeserializer
Data rate903Mbps
Case48-WFQFN Exposed Pad

Product details

903 Mbps deserializer for automotive video links

The Texas Instruments DS90UR904QSQ/NOPB is an automotive-grade (AEC-Q100) deserializer that takes a single FPD-Link II or LVDS serial stream at up to 903 Mbps and expands it into 21 parallel LVCMOS outputs. It is the receive-side complement to a matching serializer, designed to carry wide parallel video or data buses over a single twisted-pair cable in automotive infotainment, camera, and display applications. The part operates across the full -40 to 105°C automotive temperature range, making it suitable for cabin and under-hood environments where extended thermal cycling is expected.

903 Mbps data rate — what it buys the link budget

At 903 Mbps the serial link can carry an 18-bit parallel bus clocked between 10 and 43 MHz, including embedded clock and sync signals. That bandwidth covers XGA-resolution video or equivalent sensor data over cable lengths typical of automotive harnesses. The single-input, 21-output architecture means one twisted pair replaces a wide ribbon or flex circuit — a real weight and connector-pin savings in a vehicle harness.

Active lifecycle — no LTB pressure

The DS90UR904QSQ/NOPB carries an Active product status. There is no last-time-buy notice or NRND flag on this part.

Frequently asked questions

What is the data rate of DS90UR904QSQ/NOPB?

The serial data rate is 903 Mbps, which supports a 10 to 43 MHz parallel clock on an 18-bit bus.

What is the input type for DS90UR904QSQ/NOPB?

The serial input accepts FPD-Link II or LVDS signalling on a single differential pair.

What are the alternatives to DS90UR904QSQ/NOPB?

Within the TI FPD-Link III family there are higher-data-rate deserializers (e.g. 2.5 Gbps parts) but they use a different protocol and are not pin-compatible. For a drop-in second source within the same 903 Mbps FPD-Link II generation, the DS90UR904Q-Q1 is the same die in a different ordering code — confirm the exact suffix for your preferred tape-and-reel quantity. No direct pin-compatible second manufacturer exists for this part.