Skip to main content
Log in
Texas Instruments DS90LV031ATM/NOPB — Interface & Transceivers

DS90LV031ATM/NOPB LVDS Driver, 400 Mbps, 16-SOIC

MPNDS90LV031ATM/NOPB
Active

Texas Instruments DS90LV031ATM/NOPB LVDS Driver, 4 drivers/0 receivers, 400 Mbps data rate, 3V–3.6V supply, -40°C to 85°C, 16-SOIC package, Tube.

$2.9700Ref. price · indicative, final on quote
Texas Instruments DS90LV031ATM/NOPB datasheet (PDF)
Packaging16-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DS90LV031ATM/NOPB specifications
ParameterValue
TypeDriver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolLVDS
Operating temperature-40°C~85°C
PackageTube
Data rate400Mbps
Case16-SOIC (0.154\", 3.90mm Width)
Number of drivers (Receivers)4/0

Product details

400 Mbps LVDS driver — signal integrity for short-reach serial links

The DS90LV031ATM/NOPB: It delivers four independent driver channels, each capable of 400 Mbps, with a single 3V to 3.6V supply.

4/0 driver count — unidirectional transmit only

With four drivers and zero receivers, this IC is a pure transmit-side device. It is not a transceiver; you pair it with a separate LVDS receiver for a complete bidirectional link.

Industrial temperature range — not automotive qualified

It is not AEC-Q100 qualified, so it is not suitable for automotive applications that require PPAP documentation or grade-0/-1 temperature capability. For designs that must survive under-hood or high-humidity conditions, look at the DS90LV031A-Q1 variant if available, or verify that the industrial temperature grade meets the system's worst-case ambient.

Frequently asked questions

What is the difference between DS90LV031ATM/NOPB and DS90LV031ATMX/NOPB?

The difference is packaging and shipping medium. The DS90LV031ATM/NOPB ships in Tube (standard SOIC-16 rails), while the DS90LV031ATMX/NOPB ships in Tape & Reel. The die, electrical specifications, and package body are identical. For high-volume pick-and-place assembly, the 'MX' reel variant is preferred; for prototypes or low-volume builds, the Tube version is fine.

Does DS90LV031ATM/NOPB support 3.3V only?

It does not support 5V supplies. The LVDS output swing and common-mode voltage are optimized for 3.3V rails, so running it from a 5V supply without a regulator would exceed the absolute maximum ratings.