400 Mbps LVDS receiver in SOT-23-5
The SOT-23-5 footprint (SC-74A) keeps the PCB area under 9 mm², which suits dense automotive ECU layouts where every square millimetre is budgeted. AEC-Q100 qualification means this part has passed the full suite of automotive stress tests — temperature cycling, ESD, latch-up, and extended high-temperature operating life. For a tier-1 supplier submitting a PPAP package, the AEC-Q100 certificate is a gate item; the DS90LT012AQMF/NOPB carries it on the label.
Supply and temperature envelope
Operating temperature spans -40°C to 125°C, covering the under-hood and engine-bay ambient range. The 3V to 3.6V supply is a direct fit to a 3.3V rail with ±10% margin — no extra regulator needed for the receiver side. The single receiver channel converts LVDS differential input to a single-ended CMOS output. At 400 Mbps the propagation delay and skew are tight enough to close timing on a 100 MHz parallel bus after deserialisation.
Active lifecycle and sourcing posture
ROHS3 compliant. Cut Tape works for prototype or low-volume builds. Sourced through our distribution channel against an RFQ. No stock-holding claim — confirm current lead time and pricing at quote time. The AEC-Q100 grade and SOT-23-5 package are the two constraints that limit drop-in alternatives; verify the BOM position before committing.