Skip to main content
Texas Instruments DRV8860PWR — Discrete Semiconductors
Texas Instruments

TI DRV8860PWR Low-Side Motor Driver, 8-38V, 200mA, SPI

MPNDRV8860PWR
End of Life

Texas Instruments DRV8860PWR, Driver - Fully Integrated, Control and Power Stage, NMOS, 8 Low-Side Outputs, 200mA, 8-38V, SPI, 16-TSSOP, -40°C to 150°C TJ.

$3.54Ref. price · indicative, final on quote
DRV8860PWR datasheet
Packaging16-TSSOP (0.173", 4.40mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DRV8860PWR Technical Specifications
ParameterValue
Mounting typeSurface Mount
Motor type - AC, DCBrushed DC
Motor type - stepperUnipolar
Voltage - load8V ~ 38V
Voltage8V ~ 38V
Current - output200mA
InterfaceSPI
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionDriver - Fully Integrated, Control and Power Stage
TechnologyNMOS
ApplicationsGeneral Purpose
Case16-TSSOP (0.173\", 4.40mm Width)
Output configurationLow Side (8)

Product details

Eight low-side drivers with SPI — what you get

The DRV8860PWR integrates eight NMOS low-side switches, a control engine, and a power stage in a 16-TSSOP package. Each output is rated for 200 mA continuous, and the supply rail accepts 8 V to 38 V. Communication is over SPI. The junction temperature range is -40°C to 150°C TJ.

200 mA per channel — sizing the load budget

Each of the eight low-side outputs sinks 200 mA. That is enough for small relays, indicator lamps, solenoid valves, or the phases of a unipolar stepper motor.

Lifecycle and sourcing

The DRV8860PWR carries an Active product status and is ROHS3 compliant. For dual-sourcing, the DRV8811PWPR is a functional peer but uses half-bridge outputs (four channels at 1.9 A) and a Logic interface rather than SPI; verify your output configuration before substituting.

Frequently asked questions

What is the output current and voltage range of DRV8860PWR?

Each low-side output sinks 200 mA continuous. The supply voltage range is 8 V to 38 V, covering 12 V and 24 V industrial rails.

What are the alternatives or equivalents to DRV8860PWR?

The DRV8811PWPR is a functional peer with four half-bridge outputs rated at 1.9 A each, but it uses a Logic interface rather than SPI and drives bipolar steppers. Verify your output configuration and interface requirements before substituting.

Does DRV8860PWR work with SPI?

Yes, the DRV8860PWR uses an SPI interface for control. This allows daisy-chaining multiple drivers and updating all output states with a few bytes over the bus.

Is DRV8860PWR RoHS compliant?

Yes, the DRV8860PWR is ROHS3 compliant.