Skip to main content
Log in
Texas Instruments DRV8803PWP — Discrete Semiconductors

Texas Instruments DRV8803PWP Brushed DC Motor Driver, 1A

MPNDRV8803PWP
End of Life

Texas Instruments DRV8803PWP, Fully Integrated Brushed DC / Unipolar Stepper Motor Driver, Power MOSFET, 1A Output, 8.2-60V Supply, Parallel Interface, 16-PowerTSSOP (HTSSOP), Tube.

$4.45Ref. price · indicative, final on quote
Texas Instruments DRV8803PWP datasheet (PDF)
Packaging16-PowerTSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DRV8803PWP specifications
ParameterValue
MountingSurface Mount
Motor type - AC, DCBrushed DC
Motor type - stepperUnipolar
Voltage - load8.2V ~ 60V
Supply voltage8.2V ~ 60V
Output current1A
InterfaceParallel
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
FunctionDriver - Fully Integrated, Control and Power Stage
TechnologyPower MOSFET
ApplicationsGeneral Purpose
Case16-PowerTSSOP (0.173\", 4.40mm Width)
Output configurationLow Side (4)

Product details

Integrated motor driver for 1A brushed DC and unipolar stepper loads

The DRV8803PWP is a fully integrated motor driver from Texas Instruments that combines the control logic and power stage in a single 16-HTSSOP package. It drives brushed DC motors and unipolar stepper motors with a continuous output current of 1 A per channel. The four low-side outputs are configured for unipolar stepper or independent brushed DC control, with a parallel interface that simplifies connection to a host microcontroller or motion controller.

Thermal and package considerations for the 16-HTSSOP

The tube packaging is the standard shipping medium for this part — suitable for hand-assembly or low-volume reflow. Tape-and-reel variants (DRV8803PWPR) are available for automated pick-and-place lines.

Active production and compliance

Sourced through authorized distribution channels.

Frequently asked questions

What is the DRV8803PWP's output current rating?

The DRV8803PWP is rated for 1 A continuous output current per channel. This is the maximum continuous current the integrated power MOSFETs can sink without exceeding the thermal limits of the 16-HTSSOP package, assuming proper thermal pad soldering.

What motor types does the DRV8803PWP support?

The DRV8803PWP drives brushed DC motors and unipolar stepper motors. The four low-side outputs can be used as independent half-bridge drivers for two brushed DC motors, or combined to drive a single unipolar stepper motor with two phases.