Integrated stepper or dual brushed DC driver
The DRV8425EPWPR packs the control logic and power stage into a single 28-lead PowerTSSOP package — no external FETs or gate-drive circuitry needed for a bipolar stepper or two independent brushed DC motors. Rated for a 2 A continuous output current per bridge and a load supply range of 4.5 V to 33 V, it covers the common 12 V and 24 V industrial motion rails with headroom for 5 V logic and 28 V actuator buses. The Phase/Enable (PH/EN) interface keeps the control simple — two pins per bridge set direction and on/off, so a basic GPIO bank on any MCU or PLC output module can drive it without a complex serial protocol.
35 V load rating and temperature grade
The 35 V absolute maximum on the load supply (4.5 V to 33 V recommended operating range) means the part survives the typical 24 V rail plus a 30 % transient without an external clamp — useful in industrial panels where a 24 V supply can spike during a load dump. Rated for -40 °C to 125 °C ambient (TA), the DRV8425EPWPR is suited for unheated factory floors, engine-bay-adjacent enclosures, and outdoor kiosk equipment where the internal temperature can climb above 85 °C on a summer day.
Active production — sourcing posture
The part is quoted to order against the BOM quantity; availability and current pricing are confirmed at RFQ time through independent distribution.