Skip to main content
Log in
Texas Instruments DRV110APWR — Power Management (PMIC / Gate Driver)

DRV110APWR Low-Side Driver, 330mA, 14-TSSOP, Active

MPNDRV110APWR
End of Life

Texas Instruments DRV110APWR low-side gate driver, 330 mA output, PWM interface, 6V to 15V supply, 14-TSSOP package, -40°C to 125°C, Active.

$2.51Ref. price · indicative, final on quote
Texas Instruments DRV110APWR datasheet (PDF)
Packaging14-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DRV110APWR specifications
ParameterValue
MountingSurface Mount
Supply voltage6V ~ 15V
Output current330mA
InterfacePWM
Operating temperature-40°C ~ 125°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionDriver
ApplicationsElectromechanical Drivers
Case14-TSSOP (0.173\", 4.40mm Width)
Output configurationLow Side

Product details

Active production – BOM-fit for new designs

The DRV110APWR: Rated for 330 mA output, it drives a relay coil, solenoid, or contactor directly from a PWM signal – no external transistor needed in the low-side path.

6V to 15V supply – 12V rail with headroom

The 6V to 15V supply range covers a nominal 12V automotive or industrial rail, with margin for dips to 6V and transients up to 15V without a separate regulator. Operating temperature spans -40°C to 125°C, so it survives under-hood engine-bay heat and cold-soak starts.

14-TSSOP footprint – board integration note

Cut Tape works for prototypes or low-volume builds.

ROHS3 Compliant – no RoHS exemption issues for EU or global BOMs.

Frequently asked questions

What is the DRV110APWR used for?

It is a low-side gate driver for electromechanical loads – relays, solenoids, and contactors – controlled by a PWM signal from a microcontroller. The 330 mA output drives the coil directly.