Skip to main content
Texas Instruments CY74FCT163500CPVCT — Logic ICs
Texas Instruments

CY74FCT163500CPVCT FCT Bus Transceiver, Active

MPNCY74FCT163500CPVCT
End of Life

Cypress CY74FCT163500CPVCT, FCT series bus transceiver, active lifecycle, RoHS non-compliant, Bulk package.

$1.36Ref. price · indicative, final on quote
CY74FCT163500CPVCT datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

CY74FCT163500CPVCT Technical Specifications
ParameterValue
Series*
PackageBulk

Product details

What this bus transceiver does on the board

The CY74FCT163500CPVCT is a Cypress FCT-series bus transceiver — a 16-bit bidirectional buffer designed to drive backplane or memory-array lines where signal integrity matters more than raw speed. The FCT family runs at TTL-compatible levels, so it mates directly with legacy 5 V logic without level shifters, though the supply rail is typically 5 V.

Active status — no LTB worry, but watch the RoHS flag

It is RoHS non-compliant, meaning lead-bearing solder finish on the leads.

Sourcing this part — what to expect

Because the CY74FCT163500CPVCT is active but RoHS non-compliant, it's not on every distributor's shelf. We source it to order through our independent distribution network, confirming availability and current pricing at quote time. If you're filling a BOM line for a legacy board that needs this exact order code, send an RFQ — we'll check the channel for date code and quantity that matches your build window.

Frequently asked questions

Is CY74FCT163500CPVCT compatible with 3.3V logic?

The FCT series is specified for 5 V operation with TTL input thresholds (V_IH min 2.0 V, V_IL max 0.8 V). A 3.3 V CMOS output driving into the FCT input will meet the V_IH threshold, but the output swing of the FCT part is rail-to-rail at 5 V, so the receiving 3.3 V logic must tolerate 5 V input levels. Use a series resistor or level translator if the downstream device is not 5 V-tolerant.