Texas Instruments CLVC374AQPWRG4Q1, Automotive AEC-Q100 74LVC series, D-Type flip-flop, 8-bit, positive-edge triggered, tri-state non-inverted outputs, 100 MHz clock, 2-3.6V supply, -40 to 125°C, 20-TSSOP.
| Parameter | Value |
|---|---|
| Type | D-Type |
| Series | Automotive, AEC-Q100, 74LVC |
| Output type | Tri-State, Non-Inverted |
| Trigger type | Positive Edge |
| Mounting | Surface Mount |
| Supply voltage | 2V ~ 3.6V |
| Current - quiescent | 10 µA |
| Current - output high, low | 24mA, 24mA |
| Clock frequency | 100 MHz |
| Operating temperature | -40°C ~ 125°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Standard |
| Case | 20-TSSOP (0.173\", 4.40mm Width) |
| Input capacitance | 4 pF |
| Number of elements | 1 |
| Number of bits per element | 8 |
| Max propagation delay @ v, max CL | 8.5ns @ 3.3V, 50pF |
Each output delivers 24 mA source and 24 mA sink — enough to drive a loaded data bus or a bank of LEDs without external buffers. The 8.5 ns propagation delay at 3.3 V and 50 pF load gives you a clean timing budget for 100 MHz clocking; keep trace lengths short and use series termination if the bus fans out beyond four loads.
Yes, it is part of the Automotive, AEC-Q100 series, qualified for automotive-grade applications.
Both are 8-bit D-type flip-flops in the 74LVC family with the same logic function and supply range. The CLVC374AQPWRG4Q1 adds AEC-Q100 qualification and a wider temperature range (-40 to 125°C vs typical commercial 0 to 70°C). Verify the package (20-TSSOP) and pinout match your layout before substituting.