Low skew clock distribution for timing-critical boards
The Texas Instruments CGS74CT2524N is a low skew clock driver designed to distribute a clock signal with minimal propagation delay variation between outputs. It is used in systems where clock edge alignment matters — synchronous digital logic, memory interfaces, and high-speed data converters that share a common timing reference.
RoHS non-compliant — plan the BOM exemption
For production runs that must meet full RoHS conformance, this part requires a specific exemption (typically Exemption 7(c)-I for lead in electronic ceramic parts) or a customer waiver. The active lifecycle status means it remains in regular production, not a last-time-buy or end-of-life part, so supply is stable through independent distribution channels.
Bulk package — hand-assembly friendly
For a rework bench or low-volume prototype run, Bulk is easier to handle: no feeder setup, no carrier tape to cut. Pin 1 orientation is clear from the package marking; the DIP or SOIC body (typical for this series) survives a hot-air rework cycle well, and the lead pitch is wide enough for manual soldering with a fine-tip iron.