Skip to main content
Texas Instruments CD74HC365MT — Logic ICs
Texas Instruments

CD74HC365MT 74HC Buffer, Non-Inverting, 3-State, 16-SOIC

MPNCD74HC365MT
End of Life

Texas Instruments 74HC series, CD74HC365MT buffer non-inverting, 3-state outputs, 2V to 6V supply, 6-bit per element, 7.8mA drive, -55°C to 125°C, 16-SOIC surface mount.

$1.08Ref. price · indicative, final on quote
CD74HC365MT datasheet
Packaging16-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

CD74HC365MT Technical Specifications
ParameterValue
Series74HC
Logic typeBuffer, Non-Inverting
Output type3-State
Mounting typeSurface Mount
Voltage2V ~ 6V
Current - output high, low7.8mA, 7.8mA
Operating temperature-55°C ~ 125°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Case16-SOIC (0.154\", 3.90mm Width)
Number of elements1
Number of bits per element6

Product details

The Texas Instruments CD74HC365MT is a single-element, six-bit non-inverting buffer from the 74HC family, with 3-state outputs that let you disconnect the bus when the output-enable is inactive. Supply range covers 2V to 6V, making it compatible with 3.3V and 5V logic domains without a separate level shifter. Output drive is rated 7.8mA source and sink per channel — enough for light fan-out to a CMOS load or a few TTL inputs.

The 7.8mA high/low current at 5V supply is typical for 74HC logic — it drives a few CMOS gate inputs or a single LSTTL load cleanly, but don't expect to fan out to a heavy backplane or long cable without a line driver. That's a different voltage and drive tier, not a pin-for-pin swap. The CD74HC365MT stays in its lane: low-power, wide-voltage, wide-temperature bus isolation for moderate fan-out.

Frequently asked questions

Does CD74HC365MT have 3-state outputs and how are they controlled?

Yes, the outputs are 3-state. A single output-enable pin (active-low, per the 74HC365 function table) places all six outputs in high-impedance state when asserted, disconnecting the buffer from the bus. This allows multiple buffers to share a common data line.

Is CD74HC365MT suitable for 3.3V logic level translation?

Yes, the 2V to 6V supply range covers 3.3V operation. With a 3.3V rail, the buffer accepts 3.3V inputs and drives 3.3V outputs at 7.8mA. It can also translate a 3.3V logic signal to a 5V rail (or vice versa) when the supply is set to the output-side voltage, as long as input thresholds are met.