Skip to main content
Texas Instruments CD74AC10E — Discrete Semiconductors
Texas Instruments

CD74AC10E 74AC Triple 3-Input NAND Gate, 14-DIP, Active

MPNCD74AC10E
End of Life

74AC series, NAND Gate, Triple 3-Input, Through Hole, 14-DIP (0.300", 7.62mm), 1.5V ~ 5.5V supply, -55°C ~ 125°C, 12.2ns @ 5V, 50pF.

$0.97Ref. price · indicative, final on quote
CD74AC10E datasheet
Packaging14-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

CD74AC10E Technical Specifications
ParameterValue
Series74AC
Logic typeNAND Gate
Mounting typeThrough Hole
Voltage1.5V ~ 5.5V
Current - quiescent4 µA
Current - output high, low24mA, 24mA
Number of inputs3
Operating temperature-55°C ~ 125°C
PackageTube
Case14-DIP (0.300\", 7.62mm)
Number of circuits3
Input logic level - low0.3V ~ 1.65V
Input logic level - high1.2V ~ 3.85V
Max propagation delay @ v, max CL12.2ns @ 5V, 50pF

Product details

12.2 ns at 5V – timing budget matters

The CD74AC10E: Max propagation delay is 12.2 ns with a 5V supply and 50 pF load. That is fast enough for most 5V synchronous buses running below about 40 MHz. If you need to push past that, the surface-mount SN74LVC10AD clocks 4.7 ns at 3.3V – but you trade the through-hole package and the full military temperature range.

Through-hole package – field-swappable, no hot air

The 14-DIP (0.300" width) is socket-friendly. You can swap this gate on a customer site with a simple IC puller and a fresh part from the kit. No ESD bench required – just basic field practice. The wide pin spacing and clear orientation notch make it hard to mis-seat.

Active lifecycle – no LTB watch needed

This part is listed as Active with ROHS3 compliance. No last-time-buy risk, no PCN-driven scramble. You can specify it into a new BOM today and expect multi-year availability through independent distribution. Sourced and quoted to order against an RFQ; current pricing and lead time confirmed at quote time.

Frequently asked questions

What is the propagation delay of CD74AC10E?

That is the figure to use for worst-case timing closure on a 5V bus.

Is CD74AC10E compatible with 5V logic?

Yes, the supply range goes up to 5.5V, so it runs directly on a 5V rail. Input logic high threshold is 1.2V to 3.85V, which is well within 5V CMOS and TTL levels.

Can I replace a 74HC10 with CD74AC10E?

Functionally yes – both are triple 3-input NAND gates in a 14-DIP. The CD74AC10E is faster (12.2 ns vs ~19 ns for the HC version at 5V) and has a wider supply range down to 1.5V. Pinout is identical, so it is a drop-in swap if the speed and temperature range are acceptable.

What is the closest functional second-source to CD74AC10E?

The SN74LVC10AD is a surface-mount triple 3-input NAND gate with similar speed (4.7 ns at 3.3V) but a narrower supply range (1.65V to 3.6V) and commercial-to-industrial temperature range only. Not a pin-for-pin replacement due to package, but functionally equivalent if you can use SOIC.