Skip to main content
Texas Instruments BUF602IDBVT — Memory (DRAM / SRAM / Flash / EEPROM)
Texas Instruments

BUF602IDBVT Buffer IC, 8000 V/µs Slew Rate, SOT-23-5

MPNBUF602IDBVT
End of Life

Texas Instruments BUF602IDBVT, single buffer amplifier, SC-74A SOT-753 package, surface mount, 8000 V/µs slew rate, 1 GHz gain bandwidth, 2.8 V to 12.6 V supply, 60 mA output, -45°C to 85°C.

$3.15Ref. price · indicative, final on quote
BUF602IDBVT datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BUF602IDBVT Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeBuffer
Voltage - input offset16 mV
Voltage - supply span12.6 V
Current - supply5.8mA
Current - input bias3 µA
Current - output (Channel)60 mA
Operating temperature-45°C ~ 85°C
Gain bandwidth product1 GHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate8000V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

High-speed buffer for signal conditioning chains

The Texas Instruments BUF602IDBVT is a single-channel buffer amplifier designed for applications that demand wide bandwidth and fast signal edges. With a gain bandwidth product of 1 GHz and a slew rate of 8000 V/µs, this part handles video distribution, ADC front-end buffering, and RF signal conditioning where preserving signal integrity at high frequencies matters. The buffer architecture provides unity-gain stability without external compensation, simplifying layout in dense mixed-signal boards. Supply voltage spans 2.8 V to 12.6 V. Output current is rated at 60 mA per channel. The part is housed in a SOT-23-5 package, a 5-pin surface-mount footprint. Operating temperature range is -45°C to 85°C.

What the 8000 V/µs slew rate means for the design

Slew rate is 8000 V/µs. Gain bandwidth product is 1 GHz.

Frequently asked questions

What are the key differences between BUF602IDBVT and BUF602IDBVR?

The BUF602IDBVT and BUF602IDBVR are electrically identical — same buffer, same 8000 V/µs slew rate, same 1 GHz GBW. The difference is packaging: the IDBVT suffix indicates Tape & Reel (TR) packaging, while the IDBVR suffix typically indicates a different reel quantity or tape width. Check the specific reel option for your pick-and-place setup.

What are the pin functions and typical application circuit for BUF602IDBVT?

The BUF602IDBVT is a 5-pin SOT-23 device. Pin 1 is the output, pin 2 is V-, pin 3 is the non-inverting input, pin 4 is V+, and pin 5 is the inverting input (tied to output for unity-gain buffer configuration). Typical application: connect the signal to pin 3, tie pin 5 directly to pin 1, apply supply rails to pins 2 and 4, and the output at pin 1 follows the input with high bandwidth and low distortion.