Skip to main content
Texas Instruments BQ24153AYFFR — Power Management (PMIC / Gate Driver)
Texas Instruments

BQ24153AYFFR Li-Ion Charger, 1.25A, I²C, 20-DSBGA

MPNBQ24153AYFFR
Active

Texas Instruments BQ24153AYFFR, single-cell Li-Ion/Polymer battery charger, I²C programmable, 1.25A max charge current, 4.44V max pack voltage, 20-DSBGA package, -30°C to 85°C operation.

$3.6750Ref. price · indicative, final on quote
BQ24153AYFFR datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BQ24153AYFFR Technical Specifications
ParameterValue
Mounting typeSurface Mount
Battery pack voltage4.44V (Max)
Voltage6V
Current - chargingConstant - Programmable
Charge current - max1.25A
InterfaceI²C
Operating temperature-30°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
Case20-UFBGA, DSBGA
Number of cells1
Fault protectionOver Temperature, Over Voltage
Battery chemistryLithium Ion/Polymer
Programmable featuresCurrent, Timer

Product details

Single-cell Li-Ion charger with I²C programming

The Texas Instruments BQ24153AYFFR is a single-cell Li-Ion or Li-Polymer battery charger controlled over an I²C interface, allowing the host to set charge current and safety timer limits through programmable registers. It supports a maximum battery pack voltage of 4.44V and a programmable charge current up to 1.25A, with constant-current charging that adapts to the cell's needs. Fault protection covers over-temperature and over-voltage events, making it suitable for portable devices where the battery is handled by the end user.

Thermal and supply budget for portable designs

Operating from a 6V maximum supply rail, the charger can run directly from a 5V USB bus or a regulated wall adapter without an extra LDO. Packaged in a 20-DSBGA (20-bump wafer-level chip-scale) with 0.50 mm pitch, the footprint demands a controlled solder-paste stencil and a reflow profile matched to the DSBGA's smaller thermal mass.

Sourcing and lifecycle posture

Available in Tape & Reel (TR) for automated pick-and-place volume assembly and Cut Tape (CT) for prototype or low-quantity builds.

Frequently asked questions

Is BQ24153AYFFR compatible with a standard 4.2V Li-ion cell?

Yes. The maximum battery pack voltage is 4.44V, which covers the 4.2V termination voltage of a standard Li-ion cell with margin. The I²C interface lets the host set the exact regulation voltage below the 4.44V ceiling.

Does BQ24153AYFFR have a pin-compatible alternative?

The base product number is BQ24153; any pin-compatible variant would share that base number and differ only in suffix. Confirm the exact suffix against your BOM.