Skip to main content
Log in
Texas Instruments BQ24004PWP — Power Management (PMIC / Gate Driver)

BQ24004PWP Li-Ion Charger IC, 2-Cell, 1.2 A, 20-HTSSOP

MPNBQ24004PWP
Active

Texas Instruments BQ24004PWP, 2-cell Li-Ion linear charger IC, 1.2 A max charge current, 8.4 V battery pack voltage, programmable current and timer, over-temperature protection, 20-PowerTSSOP package, surface mount, -40°C to 70°C operating range.

$10.4400Ref. price · indicative, final on quote
Texas Instruments BQ24004PWP datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BQ24004PWP specifications
ParameterValue
MountingSurface Mount
Battery pack voltage8.4V
Supply voltage10V
Current - chargingConstant
Charge current - max1.2A
Operating temperature-40°C~70°C(TA)
PackageTube
Case20-PowerTSSOP (0.173\", 4.40mm Width)
Number of cells2
Fault protectionOver Temperature
Battery chemistryLithium Ion
Programmable featuresCurrent, Timer

Product details

2-cell Li-Ion linear charger in a 20-PowerTSSOP

The Texas Instruments BQ24004PWP is a linear charger IC designed for charging two-series Lithium-Ion battery packs.

1.2 A charge current and 8.4 V termination — sizing the BOM

The 1.2 A maximum charge current sets the thermal budget for the linear pass element. The programmable timer allows the designer to set a maximum charge duration, preventing overcharge if the battery never reaches the 8.4 V termination. The current-programming pin sets the constant-current phase level, which should be matched to the battery's recommended charge rate (typically 0.5 C to 1 C for Li-Ion).

Frequently asked questions

Is BQ24004PWP equivalent to BQ24004PWR?

The BQ24004PWP and BQ24004PWR share the same base product number BQ24004 and identical electrical specifications. The difference is packaging: the PWP suffix denotes Tube shipping, while the PWR suffix indicates Tape & Reel. Both are electrically interchangeable.

What battery chemistries does BQ24004PWP support?

The BQ24004PWP is designed for Lithium-Ion (Li-Ion) battery chemistry. It charges two cells in series to a nominal 8.4 V pack voltage.