Skip to main content
Log in
Texas Instruments AM26LV32CNSRG4 — Interface & Transceivers

AM26LV32CNSRG4 RS-422/RS-485 Receiver, 3V-3.6V, 16-SOIC

MPNAM26LV32CNSRG4
End of Life

Texas Instruments AM26LV32CNSRG4, RS-422/RS-485 receiver, 0/4 drivers/receivers, 50 mV hysteresis, 3V to 3.6V supply, 16-SOIC (0.209", 5.30mm width), 0°C to 70°C, Tape & Reel.

$2.2500Ref. price · indicative, final on quote
Texas Instruments AM26LV32CNSRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

AM26LV32CNSRG4 specifications
ParameterValue
TypeReceiver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature0°C~70°C
PackageTape & Reel (TR)
Case16-SOIC (0.209\", 5.30mm Width)
Receiver hysteresis50 mV
Number of drivers (Receivers)0/4

Product details

Quad RS-422/RS-485 receiver for 3.3V buses

There are no drivers on-chip; this part is receive-only, intended for the bus-receiver side of a differential pair. The 50 mV hysteresis cleans up slow edges on long cable runs and rejects noise on idle or lightly loaded RS-485 buses.

Supply rail and 5V logic compatibility

The AM26LV32CNSRG4 is specified for 3V to 3.6V supply only. It is not a 5V-tolerant receiver; applying 5V to the VCC pin exceeds the absolute maximum. For 5V RS-485 buses, use the AM26C32 family (5V supply) or a level-shifted interface. The receiver inputs are differential and tolerate common-mode voltages within the bus range, but the logic-level output is referenced to VCC — 3.3V CMOS levels, not 5V.

The 16-SOIC wide-body (0.209" body width, 5.30 mm) is the same footprint as the industry-standard SO-16W. It is wider than the narrow SOIC-16 (3.90 mm), so verify the land pattern on your PCB.

Frequently asked questions

Is AM26LV32CNSRG4 obsolete or active?

The AM26LV32CNSRG4 is active in production. No discontinuation or last-time-buy has been announced. It remains a current Texas Instruments catalog part.

How many receivers does the AM26LV32CNSRG4 have?

It has four receivers and zero drivers — a quad receive-only device for RS-422/RS-485 buses.

Is AM26LV32CNSRG4 compatible with 5V logic?

No. The supply is 3V to 3.6V, and the logic-level output swings to VCC. For 5V systems, use the AM26C32 family or add a level translator.

What is the closest pin-compatible alternative to AM26LV32CNSRG4?

The AM26LV32E family (e.g., AM26LV32EIDR) is a direct pin-compatible upgrade with enhanced ESD protection and extended temperature range. Verify the specific suffix for package and temperature grade.