Skip to main content
Log in
Texas Instruments ADS1015QDGSRQ1 — Analog & Data Acquisition

ADS1015QDGSRQ1 Automotive AEC-Q100 12-Bit ADC, I²C, 3.3k SPS

MPNADS1015QDGSRQ1
Active

Texas Instruments ADS1015QDGSRQ1, Automotive AEC-Q100, 12-bit sigma-delta ADC, I²C, 3.3k SPS, 2-4 inputs, PGA, internal reference, -40°C to 125°C, 10-VSSOP.

$3.7100Ref. price · indicative, final on quote
Texas Instruments ADS1015QDGSRQ1 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ADS1015QDGSRQ1 specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Input typeDifferential, Single Ended
MountingSurface Mount
Reference typeInternal
Voltage - supply, analog2V ~ 5.5V
Voltage - supply, digital2V ~ 5.5V
I/O channels2, 4
InterfaceI²C
Operating temperature-40°C~125°C
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesPGA, Selectable Address
ArchitectureSigma-Delta
ConfigurationMUX-PGA-ADC
Number of bits12
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of a (D converters)1
Sampling rate (Per second)3.3k

Product details

Why the AEC-Q100 grade matters for your sensor node

Internal reference — one less BOM line

For a calibration technician, the question is whether the internal reference's accuracy and drift over temperature meet the measurement tolerance — the datasheet's typical curves are the place to check, not the 'typical' line in the spec table.

PGA and input mux — one ADC for multiple sensors

The MUX-PGA-ADC architecture lets you connect up to four single-ended or two differential inputs through a single converter. The programmable gain amplifier (PGA) amplifies small sensor signals — thermocouple, shunt, pressure bridge — before conversion, so you can skip the external op-amp stage for many applications.

Frequently asked questions

Is ADS1015QDGSRQ1 compatible with 3.3V logic?

Yes. The digital supply range is 2V to 5.5V, so the I²C interface operates at 3.3V logic levels without a level shifter. The same range applies to the analog supply, so a 3.3V rail powers both sides.

Does ADS1015QDGSRQ1 require an external reference?

No. The ADC includes an internal reference, so no external voltage reference component is needed. Verify the reference accuracy and drift against your measurement tolerance before committing the BOM.

What is the difference between ADS1015QDGSRQ1 and ADS1015?

The ADS1015QDGSRQ1 is the AEC-Q100 automotive-qualified version of the base ADS1015.