Skip to main content
Log in
Texas Instruments 74LVC2G241DCURG4 — Interface & Transceivers

74LVC2G241DCURG4 Buffer Non-Inverting, 1.65V-5.5V, 8-VSSOP

MPN74LVC2G241DCURG4
End of Life

Texas Instruments 74LVC2G241DCURG4, Series 74LVC, Buffer Non-Inverting, 2-Element, 1-Bit per Element, 3-State Output, 32mA, 1.65V-5.5V, -40°C~125°C, Surface Mount, 8-VFSOP/8-VSSOP.

$0.6000Ref. price · indicative, final on quote
Texas Instruments 74LVC2G241DCURG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

74LVC2G241DCURG4 specifications
ParameterValue
Series74LVC
Logic typeBuffer, Non-Inverting
Output type3-State
MountingSurface Mount
Supply voltage1.65V ~ 5.5V
Current - output high, low32mA, 32mA
Operating temperature-40°C~125°C(TA)
PackageTape & Reel (TR)
Case8-VFSOP (0.091\", 2.30mm Width)
Number of elements2
Number of bits per element1

Product details

Each of the two elements handles one bit, with symmetric 32 mA source and sink drive.

Supply voltage and temperature — the fit check

The 32 mA per-channel output is enough to drive an LED directly or fan out to a few CMOS loads, but for heavier bus lines or long cables, plan on an external line driver.

Package — VSSOP-8 footprint reality

The 8-VFSOP (0.091", 2.30 mm width) package, also called 8-VSSOP, is a very small outline. The 2.30 mm body width and 0.65 mm pin pitch save board area but demand careful soldering — the fine pitch makes hand rework tricky without a hot-air station. Surface-mount only, no through-hole variant in this order code.

For dual-sourcing resilience, the 74LVC2G241 family includes multiple package options — the DCURG4 suffix identifies this specific VSSOP-8 reel variant.

Frequently asked questions

Is 74LVC2G241DCURG4 a direct replacement for 74LVC2G240?

No — the 74LVC2G240 is an inverting buffer, while the 74LVC2G241 is non-inverting. They are not pin-compatible replacements. Check the logic function before substituting.

Is 74LVC2G241DCURG4 compatible with 3.3V logic?

Yes — the supply voltage range of 1.65 V to 5.5 V includes 3.3 V. The 32 mA output drive at 3.3 V is sufficient for standard 3.3 V CMOS and TTL-compatible loads.