Skip to main content
Log in
TDK Corporation ACM4532-102-3P-T001 — EMI Filters & Ferrite Beads

TDK ACM4532-102-3P-T001 3-Line EMI Filter, 1 kOhm @ 100 MHz

MPNACM4532-102-3P-T001
Obsolete

TDK ACM series, Signal Line EMI Filter, ACM4532-102-3P-T001, 3-line, 1812 (4532 Metric) package, 1 kOhms @ 100 MHz, 200 mA, 20 VDC.

$0.8400Ref. price · indicative, final on quote
TDK Corporation ACM4532-102-3P-T001 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ACM4532-102-3P-T001 specifications
ParameterValue
SeriesACM
Filter typeSignal Line
MountingSurface Mount
Voltage rating - DC20V
Current rating200mA
Impedance @ frequency1 kOhms @ 100 MHz
Operating temperature-25°C ~ 85°C
Height0.091\" (2.30mm)
Size (Dimension)0.177\" L x 0.126\" W (4.50mm x 3.20mm)
PackageTape & Reel (TR) Cut Tape (CT)
Case1812 (4532 Metric), 6 Lead
Number of lines3
DC resistance (DCR)600mOhm

Product details

Obsolete 3-line common-mode filter — what the ratings mean for a replacement search

The TDK ACM4532-102-3P-T001 is a 3-line signal line EMI filter in the 1812 (4532 Metric) footprint, offering 1 kOhms of common-mode impedance at 100 MHz. The 200 mA current rating and 20 VDC voltage rating define the signal path it can clean — think low-current data lines like I²C, SPI, or sensor interfaces running under 20 V. The 600 mOhm max DCR means a 200 mA load drops 120 mV across the filter — budget that into the rail margin if the downstream IC runs near its minimum supply.

Lifecycle reality — discontinued, no official successor

TDK lists the ACM4532-102-3P-T001 as obsolete. For a BOM that already qualifies this footprint, the key cross-reference parameters are the 1812 case size, 3-line configuration, and the 1 kOhm impedance target at 100 MHz.

Sourcing posture — quoted to order

Discontinued by TDK, the ACM4532-102-3P-T001 is available through independent surplus and broker channels.

Frequently asked questions

Where can I buy the ACM4532-102-3P-T001?

The part is obsolete from TDK but available through independent distribution.

What is the closest pin-compatible alternative to the ACM4532-102-3P-T001?

A replacement search should target a 3-line, 1812 (4532 Metric) common-mode choke with 1 kOhm impedance at 100 MHz, 200 mA or higher current rating, and DCR at or below 600 mOhm.