TDK Corporation ACM-E series common mode filter, ACM2012E-900-2P-T01, 90 Ohms @ 100 MHz, 330 mA, 50 VDC, 2-line, 0805 package.
| Parameter | Value |
|---|---|
| Series | ACM-E |
| Filter type | Signal Line |
| Mounting | Surface Mount |
| Voltage rating - DC | 50V |
| Current rating | 330mA |
| Impedance @ frequency | 90 Ohms @ 100 MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.043\" (1.10mm) |
| Size (Dimension) | 0.079\" L x 0.047\" W (2.00mm x 1.20mm) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | Horizontal, 4 PC Pad |
| Number of lines | 2 |
| DC resistance (DCR) | 350mOhm |
The ACM2012E-900-2P-T01: This is a 2-line common mode filter rated 90 Ohms at 100 MHz — the impedance peak targets differential-mode noise on high-speed signal pairs such as USB, LVDS, or Ethernet differential traces. The 330 mA current rating and 350 mOhm DCR keep the voltage drop under 0.12 V at full load, so it fits low-power signal paths without starving the receiver.
Availability, pricing, and lead time are confirmed at quote time against an RFQ.
It provides 90 Ohms of common-mode impedance at 100 MHz, typical for filtering differential signal lines.