220 pF at 16V in an 0201 footprint — the SMPS filtering fit
The EMK063BJ221MP-F: At 220 pF and 16V the M series MLCC sits squarely in the low-value decoupling and SMPS switching-side filtering band — the 0201 outline (0.60 mm × 0.30 mm, 0.33 mm thick max) demands a fine-pitch pad stack and controlled paste transfer during reflow, since the component body has essentially no standoff to float in any excess solder. X5R classification means the 220 pF nominal drifts roughly ±15% across the -55°C to 85°C operating window — for ripple filtering on a switching rail this drift is usually acceptable; for precision timing or reference-grade bypassing, a C0G/NP0 replacement in the same 0201 footprint would be the swap, though at a higher price per unit.
Supply chain posture and what the BOM line needs
Series M covers a wide capacitance range under the same 0201 footprint, so the BOM position count and the actual dielectric grade (X5R vs X7R vs C0G) are the two fields that must match the valueless reel and the incoming lot's date code — any deviation in the ordering system flags a potential series mismatch before the reel ships.