100 pF at 16 V — 0201 SMPS filter capacitor
Taiyo Yuden's EMK063BJ101MP-F is a 100 pF ±20% multilayer ceramic capacitor rated 16 V in the 0201 (0603 Metric) surface-mount package, with a maximum thickness of 0.33 mm — thin enough to sit under most ball-grid arrays and passives on a dense PCB without adding stack-up.
X5R dielectric — what the temperature grade means in the filter role
The X5R temperature coefficient permits operation from -55 °C to 85 °C — broad enough for industrial and portable electronics, but the ±20% tolerance band and the dielectric's DC-bias characteristic mean the actual capacitance under a 16 VDC bias sits well below the 100 pF nominal. In an SMPS switching node filter this is typically acceptable since the absolute value matters less than the impedance notch frequency, but it rules out tight-tolerance timing or resonator applications.
Why a 0201 matters for high-density layouts
At 0.60 mm × 0.30 mm body the 0201 footprint is the go-to choice when board area is the constraint. The 0.33 mm max thickness keeps the part below the typical BGA solder-joint height on multilayer boards — no extra pad routing or special clearance is needed around the component.
Taiyo Yuden lists the EMK063BJ101MP-F as Active — ordered per Tape & Reel. Confirm MOQ and full-reel quantity at RFQ before committing to a BOM line.