VIPER013LSTR

STMicroelectronics

STMicroelectronics VIPER013LSTR offline switching regulator, 7 W, 800 V breakdown, 60 kHz fixed switching frequency, buck/buck-boost/flyback, 10-SOP package, -40 to 150 °C junction.

STMicroelectronics VIPER013LSTR
Download datasheet (PDF)
[IN STOCK] In Stock: 1,249 pcs
$3.76/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

VIPER013LSTR specifications
Parameter / AttributeSpecification / Value
MountingSurface Mount
Voltage - start up8 V
Voltage - breakdown800V
Voltage - supply (Vcc (Vdd))4.5V ~ 30V
Power (Watts)7 W
Frequency - switching60kHz
Duty cycle80%
Operating temperature-40°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
TopologyBuck, Buck-Boost, Flyback
Case10-SOP (0.154\", 3.90mm Width)
Fault protectionCurrent Limiting, Over Temperature, Over Voltage, Short Circuit
Output isolationEither
Internal switchYes

Technical details

7 W offline converter with 800 V avalanche-rugged MOSFET

The STMicroelectronics VIPER013LSTR is an offline switching regulator that integrates an 800 V avalanche-rugged power MOSFET and a PWM controller in a single 10-SOP package.

Fixed 60 kHz switching — transformer sizing is locked

The switching frequency is fixed at 60 kHz, which sets the transformer or inductor core size and the EMI filter corner. There is no frequency foldback or spread-spectrum; the design must accommodate the fundamental and its harmonics in the conducted emissions band. The 80 % maximum duty cycle supports a wide input-to-output voltage ratio in buck-boost and flyback configurations, useful for universal AC input (85–265 VAC) designs where the bulk capacitor voltage can swing from 120 V to 375 V.

Junction temperature headroom for hot enclosures

The 150 °C Tj(max) rating means the thermal shutdown threshold is above the operating limit, so the part can ride through transient overloads without immediate shutdown.

Integrated protection set reduces BOM count

On-chip fault protection covers current limiting, over-temperature, over-voltage, and short-circuit. The output isolation is configurable as either isolated or non-isolated, so the same part can serve a flyback with an optocoupler or a simple buck converter.

VIPER013LSTR
[ALLOC] verified
Quote