Skip to main content
STMicroelectronics TSZ182IDT — Memory (DRAM / SRAM / Flash / EEPROM)
STMicroelectronics

TSZ182IDT - STMicro Zero-Drift Op-Amp, AEC-Q100, 3 MHz

MPNTSZ182IDT
End of Life

STMicroelectronics TSZ182IDT, Series Automotive AEC-Q100, Zero-Drift Amplifier, 2 Circuit, Rail-to-Rail, 3 MHz Gain Bandwidth, 4.7V/µs Slew Rate, 8-SOIC Package, -40°C to 125°C.

$2.18Ref. price · indicative, final on quote
TSZ182IDT datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TSZ182IDT Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeZero-Drift
Voltage - input offset1 µV
Voltage - supply span5.5 V
Current - supply800µA (x2 Channels)
Current - input bias30 pA
Current - output (Channel)29 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate4.7V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Qualified for the underhood — not just 'automotive-capable'

The STMicroelectronics TSZ182IDT is a dual zero-drift operational amplifier qualified to AEC-Q100, the automotive industry's stress-test standard. That means it carries documented PPAP readiness and a temperature range of -40°C to 125°C, covering underhood, transmission, and engine-bay sensor interfaces. The 1 µV typical input offset and 3 MHz gain-bandwidth product let it handle precision current sensing and signal conditioning without external trimming — the zero-drift topology keeps the offset stable over temperature and time, which is what a battery-monitoring or motor-phase current-sense circuit needs.

Package and mounting — 8-SOIC, surface-mount only

Delivered in an 8-SOIC package (3.90 mm width), supplied in Tape & Reel or Cut Tape for reflow assembly. The 8-SOIC footprint is a standard across ST's automotive op-amp family, so a board layout can accommodate the TSV912IDT or TSV358AIDT as a second-source drop-in without a respin — though the TSZ182IDT's zero-drift performance is unique in that footprint.

Frequently asked questions

Is TSZ182IDT available via RFQ confirmation?

Availability is confirmed at quote time against an RFQ. This part is sourced through independent distribution and can be quoted to order.

Is TSZ182IDT rail-to-rail?

Yes, the output type is rail-to-rail, swinging close to both supply rails.

What is the gain bandwidth product of TSZ182IDT?

The gain bandwidth product is 3 MHz.

What are the alternatives to TSZ182IDT?

If zero-drift performance is not required, the TSV912IDT (8 MHz GBW, general-purpose) or TSV358AIDT (1.4 MHz GBW) share the same 8-SOIC footprint and AEC-Q100 qualification, making them pin-compatible alternatives for cost-optimized designs.