Skip to main content
STMicroelectronics TSV612IDT — Logic ICs
STMicroelectronics

TSV612IDT CMOS Op-Amp, 120 kHz, Rail-to-Rail Output

MPNTSV612IDT
End of Life

STMicroelectronics TSV612IDT, dual CMOS op-amp, 120 kHz gain bandwidth, 0.04 V/µs slew rate, rail-to-rail output, 1.5 V to 5.5 V supply, 10.5 µA supply current, 8-SOIC package, -40°C to 85°C.

$1.51Ref. price · indicative, final on quote
TSV612IDT datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TSV612IDT Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset4 mV
Voltage - supply span5.5 V
Current - supply10.5µA
Current - input bias1 pA
Current - output (Channel)63 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product120 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.04V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

120 kHz GBW, 10.5 µA — micropower dual op-amp for sensor and battery applications

The 0.04 V/µs slew rate and 4 mV maximum input offset voltage place it squarely in the DC-precision and low-frequency signal-conditioning class: thermocouple amplifiers, battery-monitor front-ends, photodiode transimpedance stages, and always-on wake-up comparators.

Supply range and output swing — fit check for single-supply designs

The 1.5 V minimum supply span means this part runs on a single alkaline cell or a Li-ion battery down to its protection cutoff. Rail-to-rail output swing at 63 mA per channel gives enough drive to bias an ADC input, a small relay coil, or an LED indicator without a separate buffer stage. For a BOM engineer checking rail compatibility: the TSV612IDT fits any supply between those limits — no external regulator needed for the op-amp.

Active lifecycle and compliance

ROHS3 compliant. For a procurement desk checking long-term availability: this part is still a standard catalog item, and we source it through independent distribution channels.

Frequently asked questions

Is TSV612IDT a rail-to-rail op-amp?

Yes, the TSV612IDT has rail-to-rail output, allowing the output to swing close to both supply rails.

What is the gain bandwidth product of TSV612IDT?

The gain bandwidth product is 120 kHz, suitable for DC and low-frequency signal conditioning.

What is the supply current for TSV612IDT?

Supply current is 10.5 µA per amplifier, making it a micropower part for battery-operated or always-on circuits.

What are equivalent parts to TSV612IDT?

The TSV621ICT is a single-channel variant with 420 kHz GBW and 0.14 V/µs slew rate. The TS27L2IDT is a dual CMOS op-amp with 100 kHz GBW and a lower 1.1 mV input offset. Neither is a pin-for-pin drop-in; check the package and supply voltage for your design.