Skip to main content
Log in
STMicroelectronics TSC2010HYDT — Analog & Data Acquisition

STMicroelectronics TSC2010HYDT Current Sense Amplifier

MPNTSC2010HYDT
End of Life

STMicroelectronics TSC2010HYDT current sense amplifier, single circuit, 3.9 V/µs slew rate, 750 kHz -3 dB bandwidth, push-pull output, 2.7 V to 5.5 V supply, -40°C to 150°C, 8-SOIC package.

$4.91Ref. price · indicative, final on quote
STMicroelectronics TSC2010HYDT datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TSC2010HYDT specifications
ParameterValue
Output typePush-Pull
MountingSurface Mount
Amplifier typeCurrent Sense
Voltage - input offset500 µV
Voltage - supply span5.5 V
Current - supply1.5mA
Current - input bias35 µA
Operating temperature-40°C ~ 150°C (TA)
-3db bandwidth750 kHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3.9V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Current sense amplifier for high-temperature shunt monitoring

The STMicroelectronics TSC2010HYDT is a single-channel current sense amplifier in an 8-SOIC package, designed to measure current through an external shunt resistor and output a proportional voltage via a push-pull output stage. The -40°C to 150°C operating temperature range qualifies it for under-hood automotive environments and other high-temperature industrial settings where reliability at elevated ambient is critical. Supply current is 1.5 mA, a moderate figure that suits always-on monitoring without excessive power draw on the system rail.

Frequently asked questions

What is the typical application for TSC2010HYDT?

This current sense amplifier is used for high-side or low-side shunt current monitoring in automotive ECUs, battery management systems, motor current sensing, and industrial power supplies where the operating temperature can reach 150°C.

What is the equivalent or replacement for TSC2010HYDT?

The closest functional peer within ST's portfolio is the TSC200IDT, which offers a 1 MHz bandwidth and 7 V/µs slew rate but has an open-drain output and a -40°C to 125°C temperature range. For a direct pin-compatible replacement with push-pull output and 150°C rating, the TSC2010HYDT is the part to specify.

What is TSC2010HYDT's listed slew rate?

The slew rate is 3.9 V/µs, which determines how quickly the output voltage can respond to a step change in the sensed current. This is adequate for monitoring load transients in automotive and industrial systems.