STMicroelectronics TSB514IDT quad general-purpose op-amp, 6 MHz gain bandwidth, 3 V/µs slew rate, rail-to-rail I/O, 2.7 V to 36 V supply, -40°C to 125°C, 14-SOIC package.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1.5 mV |
| Voltage - supply span | 2.7 V |
| Current - supply | 1.8mA (x2 Channels) |
| Current - output (Channel) | 50 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 6 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 3V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
The four amplifiers are housed in a 14-SOIC package, making it a compact choice for multi-channel signal chains in industrial, automotive, and telecom equipment.
The 2.7 V to 36 V supply span means this op-amp can run off a 3.3 V logic rail or a 24 V industrial bus without a secondary regulator. The rail-to-rail output swing gives the full supply headroom to the ADC — no lost counts at the top end.
The TSB511ILT is a single-channel version of the same amplifier core — same 6 MHz GBW, 3 V/µs slew, and rail-to-rail I/O — but in a smaller package. For a quad-channel drop-in, the TS974IPT offers a 12 MHz GBW and 4 V/µs slew with AEC-Q100 qualification, though at a slightly higher supply current. No direct pin-compatible second-source is listed; qualify the alternate for your specific gain and load conditions.