Skip to main content
STMicroelectronics TSB511ILT — Memory (DRAM / SRAM / Flash / EEPROM)
STMicroelectronics

STMicroelectronics TSB511ILT General Purpose Op-Amp, 6 MHz

MPNTSB511ILT
End of Life

STMicroelectronics TSB511ILT, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 6 MHz GBW, 3 V/µs Slew Rate, 2.7 V to 36 V Supply, SOT-23-5 Package, -40°C to 125°C.

$1.94Ref. price · indicative, final on quote
TSB511ILT datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TSB511ILT Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.5 mV
Voltage - supply span2.7 V
Current - supply1.8mA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product6 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

Rail-to-rail I/O with wide supply range — what it means on the bench

The STMicroelectronics TSB511ILT is a single-channel general-purpose op-amp in a SOT-23-5 package. Its 6 MHz gain-bandwidth product and 3 V/µs slew rate suit it for sensor conditioning, active filters, and ADC driver stages. The rail-to-rail input and output stages let it swing within millivolts of either supply rail. Supply span from 2.7 V to 36 V covers common industrial rails without needing a separate regulator. The -40°C to 125°C operating range qualifies it for outdoor telecom cabinets, under-hood automotive modules, and factory-floor enclosures where ambient temperature can climb. Output can source or sink 50 mA — enough to drive a reference input, a small relay coil, or a modest analog output stage.

Active production — no LTB concerns

The TSB511ILT carries an Active lifecycle status and is ROHS3 compliant. No last-time-buy or phase-out notices are on record. Sourced through independent distribution; availability and current pricing are confirmed at quote time against an RFQ.

Frequently asked questions

Is TSB511ILT compatible with 3.3 V systems?

Yes, the minimum supply voltage is 2.7 V, so it operates on a 3.3 V rail with margin. The rail-to-rail output also helps maintain signal swing at low supply voltages.

Can TSB511ILT replace LM358?

The TSB511ILT is a single-channel rail-to-rail op-amp with a 6 MHz GBW and 3 V/µs slew rate, while the LM358 is a dual-channel op-amp with lower bandwidth (typically 1 MHz) and no rail-to-rail output. The TSB511ILT offers higher speed and wider output swing but is not a pin-for-pin drop-in replacement for the LM358 in a dual-channel socket.

What is the closest functional second-source for TSB511ILT?

The TS921IDT is a single-channel rail-to-rail op-amp in the same package family with a 4 MHz GBW and 1.3 V/µs slew rate — a lower-speed sibling. For a closer match in bandwidth, the TS462CDT offers 12 MHz and 4 V/µs but is a dual-channel device and has a narrower temperature range (-20°C to 70°C).