Skip to main content
Log in
STMicroelectronics TS922ID — Analog & Data Acquisition

TS922ID Automotive Dual Rail-to-Rail Op-Amp, 4 MHz, 8-SOIC

MPNTS922ID
End of Life

ST TS922ID, dual general-purpose op-amp, AEC-Q100, rail-to-rail output, 4 MHz GBW, 1.3 V/µs slew rate, 2.7 V to 12 V supply, -40°C to 125°C, 8-SOIC, tube.

$2.35Ref. price · indicative, final on quote
STMicroelectronics TS922ID datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TS922ID specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span2.7 V
Current - supply2mA
Current - input bias15 nA
Current - output (Channel)80 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product4 MHz
GradeAutomotive
PackageTube
Slew rate1.3V/µs
QualificationAEC-Q100
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

The ST TS922ID is a dual general-purpose op-amp with rail-to-rail output, qualified to AEC-Q100 for automotive-grade applications.

AEC-Q100 qualification — capable is not qualified

AEC-Q100 qualification is the hard gate for automotive BOM inclusion, and this part carries it. The TS922ID is listed with Automotive grade and AEC-Q100 certification.

Output current and drive capability

Each amplifier can source or sink up to 80 mA. For continuous operation near the limit, watch the thermal dissipation in the 8-SOIC package — the 125°C ambient rating leaves headroom, but the junction temperature needs a derating check if both channels are loaded simultaneously.

Frequently asked questions

Is TS922ID automotive qualified?

Yes, the TS922ID is listed with Automotive grade and carries AEC-Q100 qualification. It is suitable for automotive applications requiring the stress-test and reliability documentation that AEC-Q100 certification provides.

What is the difference between TS922ID and TS922IYDT?

The TS922ID and TS922IYDT share the same dual op-amp die, AEC-Q100 qualification, and 4 MHz bandwidth. The difference is packaging: the TS922ID ships in a tube, while the TS922IYDT is supplied on tape and reel for automated pick-and-place assembly.

Can TS922ID operate with a single 5V supply?

Yes, 5 V is within the 2.7 V to 12 V supply span. The rail-to-rail output will swing close to both rails at 5 V, which is typical for 5 V automotive sensor interfaces.