Skip to main content
STMicroelectronics TS921IDT — Memory (DRAM / SRAM / Flash / EEPROM)
STMicroelectronics

STMicro TS921IDT General Purpose Op-Amp, 4 MHz

MPNTS921IDT
End of Life

STMicroelectronics TS921IDT, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 4 MHz GBW, 1.3 V/µs Slew Rate, 2.7 to 12 V Supply, 8-SOIC, -40 to 125 °C.

$1.92Ref. price · indicative, final on quote
TS921IDT datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TS921IDT Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span2.7 V
Current - supply1mA
Current - input bias15 nA
Current - output (Channel)80 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product4 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.3V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

Single rail-to-rail op-amp with 80 mA output drive

The STMicroelectronics TS921IDT is a single-channel general-purpose operational amplifier in an 8-SOIC surface-mount package. It delivers a 4 MHz gain-bandwidth product with a 1.3 V/µs slew rate, and its rail-to-rail output stage swings within millivolts of both supply rails — critical for single-supply designs running from 2.7 V up to 12 V. The 80 mA output current per channel is unusually high for a general-purpose op-amp; it can directly drive LEDs, small relays, or the input of a downstream ADC without an external buffer. The -40 to 125 °C operating range qualifies it for industrial sensor interfaces, automotive cabin electronics, and outdoor telecom line cards.

Lifecycle and sourcing — active, ROHS3, available to order

The TS921IDT carries an Active product status and is ROHS3 compliant. It is sourced through independent distribution — quoted to order against an RFQ.

Package and temperature grade — 8-SOIC, -40 to 125 °C

The 8-SOIC package (0.154" body width, 3.90 mm) is a standard footprint shared with countless op-amps, ADCs, and interface ICs — no board respin needed if swapping from a similar single-channel op-amp.

Frequently asked questions

What is the equivalent or replacement for TS921IDT?

The TS921ID (Tube package) is electrically identical — same 4 MHz GBW, 1.3 V/µs slew rate, rail-to-rail output, and 80 mA drive. The only difference is the delivery format: Tape & Reel (TS921IDT) vs Tube (TS921ID).

Is TS921IDT RoHS compliant?

Yes, the TS921IDT is ROHS3 compliant.

Can TS921IDT replace a standard op-amp like LM358?

The TS921IDT is a single-channel device with a 2.7–12 V supply range, rail-to-rail output, and 80 mA output drive. The LM358 is a dual-channel op-amp with a wider supply range (3–32 V) and lower output current. The TS921IDT can replace one channel of an LM358 in a low-voltage, single-supply design where rail-to-rail swing and higher output drive are needed, but the pinout and supply limits must be checked.