Skip to main content
Log in
STMicroelectronics TS912IDT — Analog & Data Acquisition

STMicro TS912IDT Dual CMOS Op-Amp, 1.4 MHz, AEC-Q100

MPNTS912IDT
End of Life

STMicroelectronics TS912IDT, dual CMOS rail-to-rail op-amp, 1.4 MHz gain bandwidth, 1.3 V/µs slew rate, 2.7–16 V supply, 400 µA quiescent, -40 to 125 °C, 8-SOIC, AEC-Q100.

$1.66Ref. price · indicative, final on quote
STMicroelectronics TS912IDT datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TS912IDT specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset10 mV
Voltage - supply span2.7 V
Current - supply400µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)75 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1.4 MHz
GradeAutomotive
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate1.3V/µs
QualificationAEC-Q100
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Rail-to-rail CMOS op-amp for automotive signal chains

The STMicroelectronics TS912IDT is a dual CMOS operational amplifier with rail-to-rail output, packaged in an 8-SOIC for surface-mount assembly. It is qualified to AEC-Q100, making it suitable for automotive under-hood and chassis-domain applications such as sensor conditioning, actuator drive, and battery-monitoring front-ends. The 1.4 MHz gain-bandwidth product and 1.3 V/µs slew rate cover low-to-moderate speed loops, while the 400 µA supply current per two channels keeps the quiescent budget tight in always-on ECU modules.

The 2.7 V to 16 V supply span covers typical automotive rails. Rail-to-rail output swing gives maximum headroom at low supply voltages. Input bias current is 1 pA, so high-impedance sensors (piezo, photodiode) do not see loading errors.

Temperature range and package — board-level fit

Frequently asked questions

Does TS912IDT meet automotive AEC-Q100 qualification?

Yes, the TS912IDT is AEC-Q100 qualified and carries an Automotive grade rating, making it suitable for automotive applications.

What is the equivalent part for TS912IDT?

The TS922IYPT is a higher-bandwidth (4 MHz) automotive-grade dual op-amp in the same 8-SOIC package. The TS921IDT is a single-channel equivalent; the TS924IYPT is a quad-channel equivalent — both share the same 1.4 MHz GBP and AEC-Q100 qualification.