Skip to main content
STMicroelectronics T835-600G-TR — Discrete Semiconductors

STMicroelectronics T835-600G-TR Snubberless Triac, 600V 8A

MPNT835-600G-TR
Active

STMicroelectronics T835-600G-TR, Snubberless™ Alternistor triac, 600 V off-state, 8 A RMS on-state, 35 mA Igt, D2PAK surface mount, -40°C to 125°C.

$1.8100Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

T835-600G-TR specifications
ParameterValue
SeriesSnubberless™
Triac typeAlternistor - Snubberless
MountingSurface Mount
Voltage - off state600 V
Voltage - gate trigger (Vgt)1.3 V
Current - hold (Ih)35 mA
Current - gate trigger (Igt)35 mA
Current - on state (It (RMS))8 A
Current - non rep. surge 50, 60Hz80A, 84A
Operating temperature-40°C~125°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
ConfigurationSingle
CaseTO-263-3, D²Pak (2 Leads + Tab), TO-263AB

Product details

The STMicroelectronics T835-600G-TR is an 8 A RMS, 600 V off-state Alternistor triac from the Snubberless™ series, housed in a D2PAK (TO-263) surface-mount package. The single triac configuration handles one load channel per device.

The 600 V off-state voltage directly covers 120 V and 240 V AC mains with margin for line transients. The 8 A RMS on-state current supports loads up to roughly 1.9 kW at 240 VAC (resistive), though derating for ambient temperature and heatsinking applies. Gate trigger current (Igt) is 35 mA maximum with a gate trigger voltage of 1.3 V maximum, which is compatible with standard microcontroller GPIOs via a driver transistor or optocoupler. The hold current (Ih) of 35 mA maximum sets the minimum load current needed to keep the triac latched — below this, the device turns off at zero-cross, which matters for low-power loads like small fans or LED dimmers. The non-repetitive surge current (Itsm) of 80 A at 50 Hz and 84 A at 60 Hz provides a guideline for inrush handling during motor start or capacitor charging.

Without a proper thermal via array to an inner-layer or backside copper plane, the 8 A rating cannot be sustained at elevated ambient temperatures.

Frequently asked questions

What is the gate trigger current of T835-600G-TR?

The maximum gate trigger current (Igt) is 35 mA, and the maximum gate trigger voltage (Vgt) is 1.3 V.

Can T835-600G-TR be used for AC load switching?

Yes, the 600 V off-state voltage and 8 A RMS on-state current make it suitable for switching AC loads such as motors, heaters, and lighting on 120 V or 240 V mains.