Skip to main content
STTH5R06FP

STTH5R06FP 600V 5A Fast Recovery Diode, 40ns trr, TO-220FPAC

MPNSTTH5R06FP
Active

STMicroelectronics STTH5R06FP, Fast Recovery Diode, Standard Diode Type, 600V Vr, 5A Io, 40ns trr, TO-220-2 Full Pack Isolated Tab, Through Hole, Tube

$1.4000Ref. price · indicative, final on quote
PackagingTO-220-2 Full Pack, Isolated Tab
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

STTH5R06FP specifications
ParameterValue
Diode typeStandard
MountingThrough Hole
Voltage - DC reverse (Vr)600 V
Voltage - forward (Vf) (Max) @ if2.9 V @ 5 A
Current - reverse leakage @ vr20 µA @ 600 V
Current - average rectified5A
Operating temperature - junction175°C(Max)
SpeedFast Recovery =< 500ns, > 200mA (Io)
PackageTube
CaseTO-220-2 Full Pack, Isolated Tab
Reverse recovery time40 ns

Product details

Active production — 40 ns trr for PFC and SMPS

The STTH5R06FP is an STMicroelectronics 600 V, 5 A fast recovery epitaxial diode with a reverse recovery time of 40 ns, housed in a TO-220 Full Pack isolated tab package. This is a standard recovery rectifier, not a Schottky — the 40 ns trr places it squarely in the ultrafast class, suited for continuous-current-mode power factor correction (CCM PFC) boost stages, output rectification in LLC resonant converters, and freewheeling diodes in motor drives where the reverse recovery charge must stay low to limit switching losses.

175°C junction — thermal budget for confined layouts

The maximum junction temperature is 175°C. The TO-220 Full Pack (TO-220FPAC) has the metal tab fully encapsulated.

At 5 A and 25°C junction, the forward voltage is 2.9 V maximum. This is higher than a Schottky of similar voltage rating, but the 600 V blocking capability and 40 ns trr make it the right choice for the high-voltage rail where a Schottky would not survive. The 20 µA reverse leakage at 600 V is low enough that leakage-induced self-heating is negligible in most designs.

It is ROHS3 compliant.

Frequently asked questions

Is STTH5R06FP suitable for high frequency switching?

Yes — the 40 ns reverse recovery time qualifies it as an ultrafast diode, suitable for switching frequencies in the tens to low hundreds of kilohertz range typical of hard-switched PFC stages and resonant converters. For frequencies above 200 kHz, a SiC Schottky diode would offer lower switching losses, but the STTH5R06FP is a cost-effective choice for the 50–150 kHz sweet spot.

Is STTH5R06FP RoHS compliant?

Yes, it is ROHS3 compliant.