Skip to main content
Log in
STMicroelectronics STPS10H100CFP — Discrete Semiconductors

STPS10H100CFP Schottky Diode, 100V 5A, TO-220FP, Active

MPNSTPS10H100CFP
Active

STMicroelectronics STPS10H100CFP, dual common-cathode Schottky rectifier, 100 V reverse voltage, 5 A average rectified current per diode, fast recovery <500 ns, 730 mV forward voltage at 5 A, TO-220-3 Full Pack, through-hole, 175°C junction temperature.

$1.5100Ref. price · indicative, final on quote
STMicroelectronics STPS10H100CFP datasheet (PDF)
PackagingTO-220-3 Full Pack
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

STPS10H100CFP specifications
ParameterValue
MountingThrough Hole
Voltage - DC reverse (Vr)100 V
Voltage - forward (Vf) (Max) @ if730 mV @ 5 A
Current - reverse leakage @ vr3.5 µA @ 100 V
Current - average rectified (Io) (per diode)5A
Operating temperature - junction175°C (Max)
SpeedFast Recovery =< 500ns, > 200mA (Io)
PackageTube
TechnologySchottky
CaseTO-220-3 Full Pack
Diode configuration1 Pair Common Cathode

Product details

100 V, 5 A dual Schottky in a fully isolated TO-220FP

The fast recovery characteristic (<500 ns, >200 mA) suits it for high-frequency rectification in switch-mode power supplies and freewheeling circuits.

Conduction loss and thermal headroom

Forward voltage is 730 mV maximum at 5 A per diode — a low Vf for a 100 V Schottky, which directly cuts conduction losses in the output rectifier stage of a 48 V or 72 V bus converter. Reverse leakage is 3.5 µA at 100 V, typical for this voltage class.

It is ROHS3 compliant.

Frequently asked questions

What is the difference between STPS10H100CFP and STPS10H100D?

Both are 100 V, 5 A dual common-cathode Schottky rectifiers. The key difference is the package: the STPS10H100CFP uses the TO-220-3 Full Pack (fully isolated tab), while the STPS10H100D uses a standard TO-220-3 with a non-isolated tab. The Full Pack variant eliminates the need for an insulating washer and thermal compound for heatsink mounting, saving assembly time and improving thermal coupling consistency.

Can STPS10H100CFP replace STPS10H100CT?

The STPS10H100CT is a similar 100 V, 5 A dual common-cathode Schottky in a TO-220-3 package, but with a non-isolated tab. The STPS10H100CFP (TO-220FP) has a fully isolated tab — the pinout and footprint are the same, but the Full Pack body is slightly thicker. Electrically they are interchangeable; mechanically, the heatsink mounting differs because the isolated tab does not require an insulating pad.