Skip to main content
Log in
STMicroelectronics STP6N60M2 — Discrete Semiconductors

STP6N60M2 N-Channel MOSFET, 600 V, 1.2 Ohm, TO-220

MPNSTP6N60M2
Active

STMicroelectronics MDmesh™ II Plus series, STP6N60M2, N-Channel MOSFET, 600 V Vdss, 1.2 Ohm Rds(on) max @ 2.25 A, 10 V, 4.5 A continuous drain, 8 nC gate charge, TO-220-3 through-hole package, -55 to 150 °C junction temperature.

$1.6800Ref. price · indicative, final on quote
STMicroelectronics STP6N60M2 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

STP6N60M2 specifications
ParameterValue
SeriesMDmesh™ II Plus
FET typeN-Channel
MountingThrough Hole
Drain to source voltage600 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C4.5A (Tc)
Power dissipation60W (Tc)
Operating temperature-55°C~150°C(TJ)
PackageTube
Vgs±25V
TechnologyMOSFET (Metal Oxide)
CaseTO-220-3
Vgs(th) (Max) @ id4V @ 250µA
Rds on (Max) @ id, vgs1.2Ohm @ 2.25A, 10V
Gate charge (Qg) (Max) @ vgs8 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds232 pF @ 100 V

Product details

Its 600 V drain-source rating (Vdss) covers the 400 V DC bus in power-factor-correction stages and flyback converters, with margin for transient spikes. Gate charge is 8 nC at 10 V, a low figure that keeps switching losses modest in hard-switched topologies running at 100 kHz or higher. Input capacitance is 232 pF at 100 V drain bias, which simplifies the drive circuit — a standard gate-driver IC can push the gate without a pre-driver stage.

Package and temperature grade — through-hole, wide range

Housed in a TO-220-3 through-hole package, the STP6N60M2 suits designs where the heatsink mounts to the board or chassis — the metal tab is the drain.

Frequently asked questions

What is the Rds(on) of STP6N60M2 at typical gate drive?

Maximum on-resistance is 1.2 Ohm at 10 V gate drive with 2.25 A drain current. At 4.5 A continuous drain, conduction loss will be higher — factor that into the thermal design.

Is STP6N60M2 equivalent to STP6N60?

The base product number is STP6N60, and the STP6N60M2 is the MDmesh II Plus generation variant. Pin-compatible in the same TO-220 package, but the M2 suffix indicates improved switching performance and lower gate charge — verify the Rds(on) and gate drive requirements against your design before substituting directly.