STM32L051K6U6TR

STMicroelectronics

ST STM32L0 series STM32L051K6U6TR, ARM Cortex-M0+ 32-bit MCU, 32 MHz, 32 KB Flash, 8K x 8 SRAM, 2K x 8 EEPROM, 1.65V~3.6V, -40°C~85°C, 32-UFQFPN (5x5).

STMicroelectronics STM32L051K6U6TR
Download datasheet (PDF)
[IN STOCK] In Stock: 1 pcs
$7.16/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

STM32L051K6U6TR specifications
Parameter / AttributeSpecification / Value
SeriesSTM32L0
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.65V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed32MHz
PackageTape & Reel (TR); Cut Tape (CT)
RAM size8K x 8
Core size32-Bit Single-Core
EEPROM size2K x 8
PeripheralsBrown-out Detect/Reset, DMA, POR, PWM, WDT
ConnectivityI²C, IrDA, SPI, UART/USART
Number of i (O)27
Core processorARM® Cortex®-M0+
Case32-UFQFN Exposed Pad
Data convertersA/D 10x12b
Program memory size32KB (32K x 8)

Technical details

32 MHz Cortex-M0+ with integrated EEPROM — what it buys the BOM

It packs 32 KB of Flash, 8 KB of SRAM, and a separate 2 KB EEPROM block — the latter saves an external serial EEPROM for parameter storage in sensor nodes or config registers in motor drives.

Memory map and firmware staging

The 32 KB Flash (32K x 8) is sized for a lightweight RTOS like FreeRTOS plus a modest application layer; the 8 KB SRAM leaves room for a few hundred bytes of stack and a DMA buffer. The 2 KB EEPROM is rated for 100k erase/write cycles — enough for calibration coefficients or fault logs over a ten-year product life without wear-leveling. The internal oscillator trims to within 1% accuracy, so a crystal can be omitted in non-timing-critical designs.

Package and thermal routing

Housed in a 32-UFQFPN (5x5 mm) with an exposed pad, this package suits space-constrained PCBs.

ST lists the STM32L051K6U6TR as Active.

STM32L051K6U6TR
[ALLOC] verified
Quote