STM32H725IGK6

STMicroelectronics

STMicroelectronics STM32H725IGK6, STM32H7 series, 32-bit ARM Cortex-M7 MCU, 550 MHz, 1 MB Flash, 564 KB RAM, 128 I/O, Ethernet, CAN, USB OTG, -40 to 85°C, 176+25 UFBGA (10x10 mm).

STMicroelectronics STM32H725IGK6
Download datasheet (PDF)
[IN STOCK] In Stock: 8 pcs
$14.62/ pc

Volume pricing

Buy Now

MOQ 1 · Tray · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

STM32H725IGK6 specifications
Parameter / AttributeSpecification / Value
SeriesSTM32H7
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.62V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed550MHz
PackageTray
RAM size564K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, MDIO, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, SWPMI, UART/USART, USB OTG
Number of i (O)128
Core processorARM® Cortex®-M7
Case201-UFBGA
Data convertersA/D 12x12/b, 22x16b; D/A 2x12b
Program memory size1MB (1M x 8)

Technical details

550 MHz Cortex-M7 — what the speed rating means for your loop

The STM32H725IGK6: The ARM Cortex-M7 core runs at 550 MHz. The 1 MB Flash and 564 KB RAM support real-time OS and DMA pipelines.

Connectivity stack — Ethernet, CAN, and USB OTG on one die

This part carries an Ethernet MAC, two CAN FD controllers, and dual USB OTG — a combination that typically requires an external PHY plus a separate CAN transceiver, but the MCU itself handles the protocol layers. The MDIO interface for PHY management is also on-chip. For a panel controller or industrial gateway, this eliminates a companion network processor and simplifies the BOM. The 128 GPIOs leave enough pins for a parallel LCD and external memory bus alongside the network interfaces.

Package and layout — 176+25 UFBGA

The 176+25 UFBGA package measures 10x10 mm. It is surface-mount and requires reflow soldering.

STM32H725IGK6
[ALLOC] verified
Quote