Memory sizing and peripheral headroom
512 KB Flash and 320 KB SRAM place the STM32F745ZET6 in the mid-density tier of the STM32F7 family. That is enough for a TCP/IP stack, a small file system, and a control loop without paging.

STMicroelectronics STM32F745ZET6, STM32F7 series, 32-bit ARM Cortex-M7 MCU, 216 MHz, 512 KB Flash, 320K x 8 RAM, 114 I/O, 144-LQFP, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | STM32F7 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.7V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 216MHz |
| Package | Tray |
| RAM size | 320K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | CANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, SAI, SD, SPDIF-Rx, SPI, UART/USART, USB OTG |
| Number of i (O) | 114 |
| Core processor | ARM® Cortex®-M7 |
| Case | 144-LQFP |
| Data converters | A/D 24x12b; D/A 2x12b |
| Program memory size | 512KB (512K x 8) |
512 KB Flash and 320 KB SRAM place the STM32F745ZET6 in the mid-density tier of the STM32F7 family. That is enough for a TCP/IP stack, a small file system, and a control loop without paging.
The STM32F745ZET6 runs at 216 MHz, which is the maximum core clock for this ARM Cortex-M7 device. That clock rate, combined with the Cortex-M7's dual-issue pipeline and single-precision FPU, gives it enough throughput for real-time control loops and communications processing without needing an external DSP.
The STM32F745ZET6 and STM32F746ZET6 are pin-compatible in the same 144-LQFP package and share the same core architecture and peripheral set, but the STM32F746 adds a TFT LCD controller and a hardware JPEG codec. If your design does not use the display controller or JPEG accelerator, the STM32F745ZET6 is a functional drop-in replacement at a lower memory tier. Verify the firmware memory map — the STM32F746 carries 1 MB Flash versus 512 KB on this part.