STMicroelectronics STM32F4 series STM32F410R8T6, ARM Cortex-M4 32-bit MCU, 100MHz, 64KB Flash, 32K x 8 RAM, 50 I/O, 64-LQFP, -40 to 85°C, 1.7V to 3.6V supply.
| Parameter | Value |
|---|---|
| Series | STM32F4 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.7V ~ 3.6V |
| Operating temperature | -40°C ~ 85°C (TA) |
| Speed | 100MHz |
| Package | Tray |
| RAM size | 32K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Number of i (O) | 50 |
| Core processor | ARM® Cortex®-M4 |
| Case | 64-LQFP |
| Data converters | A/D 16x12b; D/A 1x12b |
| Program memory size | 64KB (64K x 8) |
It does not have a CAN bus controller — a point worth confirming if your design targets automotive or industrial CAN networks.
The oscillator type is internal, which reduces external BOM count for applications that can tolerate the internal RC accuracy.
The STM32F410RBT6 is the higher-density sibling in the same package — it doubles the Flash to 128 KB while keeping the same 64-LQFP footprint, 100 MHz core, and peripheral set. If your firmware grows beyond 64 KB, the RBT6 is a drop-in hardware upgrade without a board spin.
No, the STM32F410R8T6 does not include a CAN bus controller. If your application requires CAN, consider a different STM32F4 variant such as the STM32F407 series.