STMicroelectronics STM32F0 series, ARM® Cortex®-M0 32-Bit MCU, 48MHz, 128KB Flash, 16K x 8 RAM, 64-LQFP, -40°C ~ 85°C, 2.4V ~ 3.6V supply, USB, I²C, SPI, UART/USART.
| Parameter | Value |
|---|---|
| Series | STM32F0 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2.4V ~ 3.6V |
| Operating temperature | -40°C ~ 85°C (TA) |
| Speed | 48MHz |
| Package | Tray |
| RAM size | 16K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | DMA, POR, PWM, WDT |
| Connectivity | I²C, SPI, UART/USART, USB |
| Number of i (O) | 51 |
| Core processor | ARM® Cortex®-M0 |
| Case | 64-LQFP |
| Data converters | A/D 16x12b |
| Program memory size | 128KB (128K x 8) |
The STM32F0 USB implementation supports device mode natively, which means a simple USB connector and a few passives get you a virtual COM port or a custom HID class — no external PHY or USB-to-UART bridge needed. That saves board area and BOM cost compared to a part that requires an external transceiver.
ST lists the STM32F070RBT6 as Active.
The USB peripheral supports device mode natively, so no external PHY is required for a basic USB link.
A functional peer is the STM32L151CBU6A, which runs a Cortex-M3 core at 32 MHz with lower power draw and a 1.8 V supply minimum. The STM32L151 adds a DAC and capacitive sensing but drops the USB peripheral. The two are not pin-compatible — the STM32L151CBU6A comes in a 48-pin package versus the 64-pin LQFP of the STM32F070RBT6.