Skip to main content
Log in
STMicroelectronics STFI24NM60N — Discrete Semiconductors

STFI24NM60N N-Channel MOSFET, 600 V, 17 A, MDmesh II

MPNSTFI24NM60N
Obsolete

STMicroelectronics MDmesh™ II N-Channel MOSFET, 600 V drain-source, 17 A continuous drain, 190 mOhm Rds(on) at 10 V, TO-262-3 Full Pack I²Pak through-hole package, -55°C to 150°C junction temperature.

$3.9300Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STFI24NM60N specifications
ParameterValue
SeriesMDmesh™ II
FET typeN-Channel
MountingThrough Hole
Drain to source voltage600 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C17A (Tc)
Power dissipation30W (Tc)
Operating temperature-55°C ~ 150°C (TJ)
PackageTube
Vgs±30V
TechnologyMOSFET (Metal Oxide)
CaseTO-262-3 Full Pack, I²Pak
Vgs(th) (Max) @ id4V @ 250µA
Rds on (Max) @ id, vgs190mOhm @ 8A, 10V
Gate charge (Qg) (Max) @ vgs46 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds1400 pF @ 50 V

Product details

What this 600 V N-channel MOSFET brings to the board

The STFI24NM60N: The through-hole I²PAKFP (TO-281) full-pack package isolates the back tab, simplifying heatsinking in designs where the tab would otherwise carry the drain potential.

For existing designs already qualified on the STFI24NM60N, the procurement path runs through independent distribution — surplus and new-old-stock inventory sourced on a quoted-to-order basis. If you are evaluating this for a new design, look at current MDmesh series parts with similar voltage and current ratings; the package and gate-drive requirements will guide the swap.

The 600 V Vdss rating gives headroom for universal-input AC-DC converters. Gate charge is 46 nC at 10 V. Input capacitance is 1400 pF at 50 V Vds.

The through-hole I²PAKFP package (TO-281) mounts into a standard TO-262 footprint; the full-pack moulding isolates the tab, so no insulating pad is needed between the device and a grounded heatsink. That saves assembly steps and improves thermal transfer in high-vibration applications.

Frequently asked questions

What is the replacement for STFI24NM60N?

For a new design, look at current MDmesh series N-channel MOSFETs with a 600 V Vdss and similar Rds(on) and gate charge — the I²PAKFP package and 10 V gate-drive requirement will guide the pin-compatible swap. For an existing BOM, sourcing through independent distribution is the practical path.

What is the maximum drain current of STFI24NM60N?

The continuous drain current is 17 A at 25°C case temperature (Tc). Derate this value for operation above 25°C following the thermal derating curve in the datasheet.

Is STFI24NM60N pin compatible with STFI24NM60?

Both parts share the same base product number STFI24N and the I²PAKFP package, so they are pin-compatible. The suffix difference indicates a variant within the MDmesh II series — verify the Rds(on) and gate charge ratings against your design before substituting.