STMicroelectronics STD60NH03L-1, STripFET™ III N-Channel MOSFET, 30 V drain, 60 A continuous, 9 mΩ Rds(on) at 10 V, TO-251-3 (I-PAK) through-hole, -55°C to 175°C junction.
| Parameter | Value |
|---|---|
| Series | STripFET™ III |
| FET type | N-Channel |
| Mounting | Through Hole |
| Drain to source voltage | 30 V |
| Drive voltage (Max rds on, min rds on) | 5V, 10V |
| Current - continuous drain (Id) @ 25°C | 60A (Tc) |
| Power dissipation | 70W (Tc) |
| Operating temperature | -55°C~175°C(TJ) |
| Package | Tube |
| Vgs | ±20V |
| Technology | MOSFET (Metal Oxide) |
| Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Vgs(th) (Max) @ id | 1V @ 250µA |
| Rds on (Max) @ id, vgs | 9mOhm @ 30A, 10V |
| Gate charge (Qg) (Max) @ vgs | 21 nC @ 5 V |
| Input capacitance (Ciss) (Max) @ vds | 2200 pF @ 25 V |
Gate charge is 21 nC at 5 V, so the drive stage does not need a high-current gate driver for moderate switching frequencies.
The STD60NH03L-1 comes in a TO-251-3 package with short leads, also called I-PAK. This footprint is common in automotive and industrial modules where through-hole reliability is preferred over surface-mount for high-current paths. The supplier device package is I-PAK, which is the same as TO-251.
As this part is obsolete, finding a suitable replacement is critical for continuity of design.
Determining the lifecycle status helps buyers decide whether to source remaining stock or find alternatives.
Buyers need to know current availability and authorized distributors to procure the part.
Design engineers require pin configuration for PCB layout and compatibility checks.
Gate voltage limits are essential for ensuring proper drive circuit design and avoiding damage.
On-resistance affects power loss and thermal performance, crucial for efficiency calculations.