STMicroelectronics STD52P3LLH6, STripFET™ H6 series, P-Channel MOSFET, 30 Vdss, 52 A Id, 12 mOhm Rds(on), DPAK surface-mount, Tape & Reel.
| Parameter | Value |
|---|---|
| Series | STripFET™ H6 |
| FET type | P-Channel |
| Mounting | Surface Mount |
| Drain to source voltage | 30 V |
| Drive voltage (Max rds on, min rds on) | 4.5V, 10V |
| Current - continuous drain (Id) @ 25°C | 52A (Tc) |
| Power dissipation | 70W (Tc) |
| Operating temperature | 175°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Vgs | ±20V |
| Technology | MOSFET (Metal Oxide) |
| Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Vgs(th) (Max) @ id | 2.5V @ 250µA |
| Rds on (Max) @ id, vgs | 12mOhm @ 26A, 10V |
| Gate charge (Qg) (Max) @ vgs | 33 nC @ 4.5 V |
| Input capacitance (Ciss) (Max) @ vds | 3350 pF @ 25 V |
Housed in the TO-252-3 (DPAK) surface-mount package with the tab as the drain connection, the STD52P3LLH6 requires a copper land pattern that matches the tab area for thermal dissipation.
The base product number STD52 covers the family; the suffix P3LLH6 encodes the P-channel polarity, the 30 V rating, the low-threshold gate, and the H6 generation.
No. The STD80N3LL is an N-channel MOSFET; the STD52P3LLH6 is P-channel. The polarity difference means the gate drive and load connections are reversed — a direct drop-in is not possible without rewiring the circuit and inverting the gate signal.
The part also supports 4.5 V drive for lower-voltage logic, but the on-resistance at 4.5 V is higher than the 10 V figure — the datasheet's typical curve should be referenced for the exact value.