2Kbit I²C EEPROM — configuration storage fit
The M24C02-WDW6TP: This density is sized for storing calibration constants, device configuration, or small lookup tables in embedded systems where a few hundred bytes of non-volatile memory are needed.
The I²C bus lines still need pull-up resistors referenced to the same Vcc. This covers most factory-floor, outdoor enclosure, and automotive-cabin applications, though the part does not carry AEC-Q100 qualification.
NRND lifecycle — design-in considerations
STMicroelectronics lists the M24C02-WDW6TP as NRND (Not Recommended for New Designs). The 5 ms write cycle time (word or page) is the period during which the device does not acknowledge I²C traffic — firmware must poll for the ACK or insert a fixed 5 ms delay after each write command before addressing the part again.
8-TSSOP package — board integration
Supplied in Tape & Reel (standard 8 mm tape) or Cut Tape — the reel quantity suits automated pick-and-place for volume assembly; Cut Tape is available for prototype or low-volume builds.