STMicroelectronics M24C01-WMN6P is a 1Kbit non-volatile I²C EEPROM in 8-SOIC (3.90mm), rated 2.5–5.5V, -40°C to 85°C, 400 kHz clock, 900 ns access, 5ms write cycle, packaged in tube.
$0.1900Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Memory type | Non-Volatile |
| Mounting type | Surface Mount |
| Voltage | 2.5V ~ 5.5V |
| Frequency | 400 kHz |
| Memory interface | I²C |
| Operating temperature | -40°C~85°C(TA) |
| Package | Tube |
| Technology | EEPROM |
| Access time | 900 ns |
| Memory size | 1Kbit |
| Memory format | EEPROM |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Memory organization | 128 x 8 |
| Write cycle time - word, page | 5ms |
Frequently asked questions
Can I drop this onto an existing 5 V I²C board?
Yes, electrically. The 2.5–5.5 V supply range covers the legacy 5 V rail, and the 8-SOIC footprint with 3.90 mm body width is the standard SOIC-8 pad layout — no re-spanning of the I²C bus or rework of the pad geometry is required for a like-for-like replacement.
Does the I²C address scheme follow ST's standard two-wire sequence?
Yes. With a memory organization of 128 × 8, the device uses a single address byte following the standard I²C EEPROM write and read sequences. No custom register mapping is needed — the standard two-wire page-write sequence in TIA and equivalent IDE libraries applies directly.